3M™ Clean-Trace™ Oberflächen Positiv-Kontrolle ATP10

3M™ Clean-Trace™ Positive Control for Surfaces ATP10

10 ready-to-use reagent tubes

Manufacturer: 3M™

The measurement of the standard concentration of ATP with 3M™ Clean-Trace™ surface tests is used to confirm reagent and/or instrument function.

  • Ready for use
  • Easy use
  • Verification of reagent and instrument function
  • Request product info
  • 3M™ Clean-Trace™ Positive Control for Surfaces ATP10

    With this unique product, the user can easily ensure that all components used in tests are functioning properly and that the operator is using the correct method. Each ATP10 tube contains 3.0 ng or 5 x10-12 mol ATP and 1 mg protein (bovine serum albumin). Using a moistened swab, take a swab from the ATP/protein pallet and the inside of the tube with 3M™ Clean-Trace™ Surface Positive Control. The devices for Clean-Trace surface tests are then activated and measured according to the device-specific instructions. The measured signal should be above the specified limit, indicating that both the reagents (in the case of ATP testing) and the instruments are functioning properly.  To be used in combination with the 3M™ Clean-Trace™ Surface ATP, 3M™ Clean-Trace™ Surface Protein Plus, 3M™ Clean-Trace™ Surface Protein-High Sensitivity, 3M™ Clean-Trace™ Surface Protein (allergen) tests to quickly verify that reagents and instruments (if required) are functioning satisfactorily and are properly stored and used.

    Technical service

    Please find further information about our Technical Service here.

    Product downloads

    Your personal contacts

    Jens-Portr-t

    Jens-Uwe Mücke|

    Product Specialist

    +49 152 090 84 54 9
    Sabine-Portr-t2

    Sabine Damnitz|

    Product Specialist

    +49 2223 9192 135

    Related Products

    3M Rapid SRB Detection Pouch
    3M™ Rapid SRB Detection Pouch

    The 3M™ Rapid SRB Detection Pouch is a standalone culturing method designed to make field testing easy, accurate and...

    Product details
    3M™ Clean-Trace™ Wasser, Test auf freies ATP - AQF100
    3M™ Clean-Trace™ AQF100 , free ATP

    These tests are used for rapid assessment of the non-microbial ATP content in CIP rinse water or other process water...

    Product details
    3M™ Clean-Trace™ Wasser Plus, Gesamt ATP - AQT200
    3M™ Clean-Trace™ Water Plus, Total ATP - AQT200

    3M™ Clean-Trace™ Water Plus - Total ATP - AQT200 for testing CIP rinse water or other process water are used in...

    Product details
    3M™ Clean-Trace™ Tupfer - UXL10
    3M™ Clean-Trace™ Swab - UXL100

    The ready-to-use Clean-Trace™ Swabs - UXL100 are mainly used in the field of hygiene monitoring for fast detection...

    Product details
    3M Allergenprotein-Schnelltest
    3M™ Allergen Protein Rapid Tests

    "3M™ Allergen Protein Rapid Tests Lateral Flow Devices for Specific Allergen Detection - results in 11 min. "

    Product details
    3M Clean-Trace Luminometer LM1 | For ATP measurement
    3M™ Clean-Trace™ Luminometer LM1

    When it comes to hygiene monitoring, you’ve got a lot on the line — and accurate information is critical. But not...

    Product details
    3M Petrifilm Plates
    3M™ Petrifilm™ Plates

    1. Inoculate: Eliminate media prep – plates are ready to inoculate. 2. Incubate: A compact incubator is all you...

    Product details
    SphereFlash
    SphereFlash

    The SphereFlash is an Automatic Colony Counter that meets all the requirements in a modern microbiology laboratory.

    Product details