FISP® AHT Membrane Sampling Probes

Flownamics® Inc.

Single Use for AMBR® 250 A HT Vessel

Designed for Sartorius® AMBR® 250 A HT Vessel, the FISP A HT provides the sampling of a gamma-sterile, cell-free process liquid through a 0.2 micron standard ceramic membrane by a pressure drop (pump or syringe). For automated or manual sampling of a representative process sample and transfer to analysers (biochemistry and HPLC systems). Fits the Automated Sampling Models SegFlow® or Acquire®.

Key features & sales
Downloads
Technical data
Similar

Key features

  • Inline cell separation probe
  • Sterile and single-use (0.2 μm filter, gamma-sterile)
  • Fits to Sartorius® AMBR® A HT Vessel (High Troughput)
  • Alternative pore sizes: 0.45, 0.75, 1.0, 5.0, 25.0, 75.0 μm (and customised)
  • Minimal dead volume
  • Connection outside: LuerLock

Sales in

Austria, Belgium, Czech Republic, France, Germany, Hungary, Luxembourg, Poland, Slovakia, Switzerland, The Netherlands

Request info

Aseptic, Cell-Free Sampling for Sartorius® Ambr® 250 High Throughput Vessel

The FISP® AHT is a fully disposable sampling probe designed for sterile, cell-free sampling directly from the Sartorius® Ambr® 250 High Throughput Vessel. Developed by Flownamics®, it enables precise, contamination-free sample collection through a 0.2 µm membrane — suitable for both online and offline analysis.

Thanks to its compact design and minimal dead volume, the FISP® AHT ensures consistent and accurate sampling while reducing purge requirements. It integrates seamlessly with Seg-Flow® automated sampling systems, analysers, and fraction collectors, providing a reliable solution for microbial, yeast, fungal, algal, insect, and mammalian cell cultures.

This aseptic system allows automated sampling without compromising manual sampling capabilities, making it ideal for efficient and flexible bioprocess development.

Downloads

Flownamics FISP Ceramic Membrane Data Sheet

Download PDF

Technical data

FISP AHT Overall Length = 6.2″ (15.7 cm)
Body: Length = 4.1″ (10.4 cm)
End: Length= 2.4″ (6.10 cm)
Membrane Length = 1.85″ (4.7 cm)
Diameter = 0.375” (0.95 cm)
Additional lengths and diameters are available on request
Tubing C-Flex Ultra
Length = 16″ (40.6 cm)
1 check valve
1 swabable luer activated check valve
Additional tubing lengths and configurations are available on request
O-ring Silicone
Manufacturer info